combit List & Label 24 - .NET Online Web Help
Print Method (ListLabel)


combit.ListLabel24 Namespace > ListLabel Class : Print Method

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job. The overloads allow to fine tune the behavior by suppressing the file dialog, the print option dialog, preset the project file name etc. You may also use the Auto... properties (e.g. AutoProjectFile Property) to modify these settings.

Overload List
OverloadDescription

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

This overload allows to set the printer name temporarily for this print to the specified name. Please note the following:

  • The printer will be set for all regions if there are multiple regions in a project.
  • Changing the printer name is only temporary, as soon as the name is empty, the original printer name set in the project will be used again.
  • If a Print("<Printer>") is followed by a Print(), also the original printer name set in the project will be used again.
  • If an exception is triggered during printing (e.g. by the button "Cancel" in the print options dialog) which is catched in the code and a new print without a printer name is started afterwards, the default printer/design settings are active, not the printer from the cancelled print job.
 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

This overload allows to set the printer name temporarily for this print to the specified name. Please note the following:

  • The printer will be set for all regions if there are multiple regions in a project.
  • Changing the printer name is only temporary, as soon as the name is empty, the original printer name set in the project will be used again.
  • If a Print("<Printer>") is followed by a Print(), also the original printer name set in the project will be used again.
  • If an exception is triggered during printing (e.g. by the button "Cancel" in the print options dialog) which is catched in the code and a new print without a printer name is started afterwards, the default printer/design settings are active, not the printer from the cancelled print job.
 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

This overload allows to set the printer name temporarily for this print to the specified name. Please note the following:

  • The printer will be set for all regions if there are multiple regions in a project.
  • Changing the printer name is only temporary, as soon as the name is empty, the original printer name set in the project will be used again.
  • If a Print("<Printer>") is followed by a Print(), also the original printer name set in the project will be used again.
  • If an exception is triggered during printing (e.g. by the button "Cancel" in the print options dialog) which is catched in the code and a new print without a printer name is started afterwards, the default printer/design settings are active, not the printer from the cancelled print job.
 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job. The overloads allow to fine tune the behavior by suppressing the file dialog, the print option dialog, preset the project file name etc. You may also use the Auto... properties (e.g. AutoProjectFile Property) to modify these settings.

 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

Please note the following restrictions:
- Project includes are not available
- The Designer function 'ProjectPath$()' is not available
- Drilldown is not available

 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

Please note the following restrictions:
- Project includes are not available
- The Designer function 'ProjectPath$()' is not available
- Drilldown is not available

 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

 

This key method handles the databound printing. Assign a DataSource to the component and call this method to start a print job.

 
Example

 

Requirements

Platforms: Windows Vista - Windows 10 Version 1809, Windows Server 2008 - 2016

See Also

Reference

ListLabel Class
ListLabel Members